We bring you a highly practical and convenient manual core extractor – the Discoverer Double Handle Manual Effort saving Rivet Driver. This riveter adopts a dual manual operation design, which allows for easy core pulling with just one click. The operation is simple, and even if you are a manual enthusiast, you can effortlessly complete riveting work.
Below, I will provide a detailed introduction to the usage of this riveter:
Step 1: Insert the riveter into the riveting part and pull the piston rod downwards with force until a locking sound of “click” is heard, indicating that the riveter is firmly fixed.
Step 2: Rotate the handle at the other end clockwise and push the piston rod upwards until a “click” sound is heard, at which point the riveter is successfully pulled out.
Step 3: Adjust the up and down movement of the piston rod appropriately according to the size and force of the riveted parts, until the rivet is firmly riveted. After completing riveting, please remove the riveter in a timely manner.
It should be noted that when operating the riveter, please pay attention to safety and avoid hand injuries. After use, please place the riveter in a safe place in a timely manner to avoid unnecessary damage.
The Discoverer Double Hand Effort Saving Rivet Tool not only saves you time and energy, improves work efficiency, but is also a practical tool worth having.
