1、 Operation steps
1. Place the small suction pump on a stable surface and connect the adapter.
2. Connect the pipe and suction head to ensure that the connection is secure.
3. Turn on the power switch and start using it.
4. Place the suction head at the location where the gas needs to be extracted and start extracting.
5. After the extraction is completed, turn off the power switch, first remove the suction head, then remove the pipe and suction head, and clean them thoroughly.
2、 Precautions
1. Please confirm whether the power cord is functioning properly before use.
2. Do not insert your fingers into the suction head and tube during operation.
3. The suction pump needs to be cleaned regularly to avoid accumulation of dirt that may affect its effectiveness.
4. When using, it should be ensured that the extracted gas does not pose a threat to physical health.
5. Avoid using in damp or high-temperature environments, as it may affect the performance of the suction pump.
3、 Maintenance and upkeep
1. Regularly check if the power cord and adapter are damaged.
2. Clean the suction head and pipes to prevent the accumulation of dust and dirt.
3. After use, please remove the suction head and tube, place them in a dry place, and cover them with a dust cover.
If the suction pump fails to function properly and malfunctions, please contact the manufacturer for repair in a timely manner.
Small suction pumps also require normal maintenance in order to extend their service life.
