The use of a partition rapid internal cutting tube device
1. Insert the cutting head into the square hole of the pipe cutter (pay attention to the cutting direction), adjust the extension length of the cutting head, and tighten the stop screw to secure the cutting head. Adjust the dimension A between the blade and the support sleeve to be ≥ 10 tube plate thickness, and lock the support sleeve.
2. Insert the hexagonal drive shaft at the end of the pipe cutter into the chuck of the electric drill and clamp it.
3. Connect the power to the drill, hold the drill handle with one hand, and use your index finger to control the drill switch. Hold the outer sleeve of the pipe cutter with the other hand, test the drill and the pipe cutter first, then horizontally insert the positioning spindle of the pipe cutter into the pipe head to be cut, support the outer sleeve tightly on the pipe plate, press the drill switch, hold the drill hand horizontally and evenly forward, until the pipe is cut off, stop the machine, exit, and prepare to cut the next pipe head.
Structural characteristics of heavy-duty hydraulic pipe cutters
1. The design is lightweight, lightweight, and easy to carry, with unique advantages for on-site cutting of large-diameter pipelines
2. The combination of neck load adjustable bearings and reinforced bottom bearing races greatly improves reliability and operational functionality, and the fixing system can easily fasten the pipeline to be processed
3. Tightening components, simple requirements, can be adjusted with just one wrench specification
4. High security. Using tool rotation to complete cutting and beveling in static pipeline conditions
5. The incision is not deformed, without burrs, and always kept clean. It is extremely suitable for situations requiring high-quality welding
6. Power configuration, multiple choices, different regions and environments equipped with motors of different voltages or driven by engines, can be used for on-site operation of non electric configurations in the field
7. Connect to the hydraulic station using quick connectors, plug and play, convenient and fast
8. Cutting pipe materials comprehensively: plastic pipes, copper, brass, iron, ordinary steel, aluminum, high-quality steel, high-quality stainless steel, and titanium, etc
Performance characteristics of fully automatic heat shrink tube cutter
1. The length and speed can be continuously adjusted at will
2. Can automatically accumulate in batches and total cumulative count
3. Adjustable cutting speed, all Chinese LCD display, controlled by microcomputer program with an accuracy of 0.1mm
4. Automatic shutdown due to shortage of materials, unmanned
5. Batch pause and delay time can be set
6. Can automatically cut various tubular and strip materials;
7. Accurate control of pipe cutting length by high-speed stepper motor; Adjustable belt length and speed;
8. Knife cutting time protection; Total number setting; Splitting settings; The pause time of the distribution can be adjusted;
9. Equipped with various manual operations for easy debugging;
The fully automatic heat shrink tube cutter is generally widely used for high-speed cold semi cutting of strips. Its notable features are high precision, low loss, machine design that conforms to ergonomic principles, simple operation, and high automation.
The plate outer pipe cutter is a new type of practical tool that is quickly cut from the inner wall of a metal pipe outward by a cutting tool. It is a matching tool for electric pipe expanding machines, and the cut pipe opening can be directly expanded and flanged from the inside out without the need for manual removal of burrs. The plate cutter is an ideal tool for removing excess tube heads before expansion.
The outer plate pipe cutter adopts front and rear dual positioning (positioning copper sleeve and positioning core shaft), and the front end adopts copper sleeve positioning, greatly enhancing the stability during pipe cutting, while avoiding the pipe mouth being scratched by the positioning core shaft of the pipe cutter, improving the quality of pipe cutting operation.
Instructions for using the outer plate pipe cutter
1. Insert the cutting head into the square hole of the pipe cutter (pay attention to the cutting direction), adjust the position so that the cutting head does not touch the inner wall of the support sleeve when the cutting head is lifted. Tighten the stop screw, fix the cutting head, adjust the position of the support sleeve according to the length of the pipe head, and lock the nut.
2. Insert the hexagonal drive shaft at the end of the pipe cutter into the chuck of the electric drill and clamp it.
3. Connect the power to the drill, hold the drill handle with one hand and control the drill switch with your index finger, and hold the outer sleeve of the pipe cutter with the other hand. After the test run is normal, level the drill and pipe cutter, insert the positioning spindle of the pipe cutter horizontally into the pipe head to be cut, support the outer sleeve tightly on the pipe plate, press the drill switch, hold the drill hand horizontally and evenly forward, until the pipe is cut off, stop the machine and exit the cut pipe head.
4. If the pipe is too long, a pipe cutter can be used for segmented cutting or a specially designed extended pipe cutter (not exceeding 100mm in length) according to customer requirements.
